A glass demo room for a portable pump
A 96 m² peninsula stand with a glazed demo room, so clinicians could handle a new infusion pump while the aisle watched through the glass.
Corvane Medical
·
Clinical Devices Assembly
·
Port Calder
2025
Floor area
96 m²
Footprint
8 × 12 m
Open sides
Peninsula · 3 open sides
Service
Custom stands
Days on site
3
Went on to another job
58%
Corvane was launching a portable infusion pump and wanted clinicians to use it, not just look at it. They also needed a private room for procurement meetings. The stand had to feel clinical without looking like a ward.
The centre of the stand is a 3 × 4 m demo room with toughened glass walls and a wipe-clean solid-surface bench. Clinicians worked through a real setup routine inside, and people in the aisle could watch every step.
Behind it sits a meeting room lined in recycled PET acoustic felt, with a sliding door and seats for six. We tested the sound levels on our trial floor with a hall-noise recording before we signed it off.
The 4.5 m header carries a backlit fabric lightbox with the pump shown three metres tall. We set every fitting on the stand to 4000 K so the product looked the way it does on a hospital shelf.
The counters, the meeting room and the header frame were all built to our standard panel grid. After the show, 58% of the stand went into storage as the start of Corvane’s own kit.
Powder-coated aluminium frame Toughened glass Solid-surface worktops Recycled PET acoustic felt Tension-fabric lightboxes Oak-veneer plywood
Clinicians stayed at the demo bench for twenty minutes at a time. We’d planned for five. The glass meant the queue could see what they were queuing for.
Lise Okonjo, Head of Marketing, Corvane Medical